Digiplex DGP2-641BL Provozní pokyny stáhnout pdf (Strana 8)

8 System Manager’s Manual

3.7 ONE-TOUCH BUTTONS

If enabled by your Installer, you can access the following features without using your User Access Code by pressing

and holding the desired One-Touch button.

3.8 KEYSWITCH ARMING

A key can be used to arm and disarm your system using two forms of keyswitches. With a Maintained Keyswitch,

place the key in the “ON” position to arm your system, and place the key in the “OFF” position to disarm your

system. With a Momentary Keyswitch, place the key in the “ON” position briefly then place it back in the “OFF”

position to arm the system. Repeat this process to disarm with a Momentary Keyswitch.

3.9 AUTO-ARMING

If enabled by your Installer, you can set the time that an area will arm itself automatically.

3.9.1 TIMED AUTO-ARMING

3.9.2 N

O MOVEMENT AUTO-ARMING

Your system can be programmed to send a report to your Central Monitoring Station and/or arm the system if there

is no activity in the area during a specified period of time. Your installer can set No Movement Auto-Arming to

function in either Regular or Stay arming mode.

4.0 DISARMING

When your system is disarmed, it deactivates any alarms in progress, and it deactivates the zones so the alarm will

not be triggered if zones are breached.

4.1 ENTRY DELAY TIMER

Your installer will program designated entry points (i.e. the front door) with an Entry Delay Timer. This delay gives

you time to enter the armed premises and enter your code to disarm your system before the alarm is triggered.

BUTTON FEATURE BUTTON FEATURE

[

ARM] Regular arm [DISARM] Disarm a Stay/Instant armed area

[

STAY] Stay arm [5] Instant arm

[

FORCE] Force arm [6] Change display settings

[

BYP] Bypass Programming [7] View Event Record display

Your installer can set Timed

Auto-Arming to function in

either Force or Stay arming

mode. A sixty-second Exit

Delay sequence will begin

prior to your system

automatically arming itself at

the programmed time.

How do I set the Auto-Arming timer?

1) Enter your [

ACCESS CODE].

2) Press the [0] button.

3) Press the [MEM] button.

4) If you have access to more than one area, press the area’s number, or use

the [S] and [T] buttons and press the [

ACC] button when the area you want

to program appears on the screen.

5) Enter the time you want the area to be armed according to the 24-hour clock

(i.e. 9 a.m. is 09:00 and 9 p.m. is 21:00).

6) Press the [ENTER] button to save and exit.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Komentáře k této Příručce

Žádné komentáře

Digiplex DGP2-641BL Provozní pokyny Strana 8

Komentáře k této Příručce