Digiplex DGP2-641BL Provozní pokyny stáhnout pdf (Strana 10)

10 System Manager’s Manual

5.2 USER LABELS

5.2.1 K

EYPAD BUTTONS

Every numeric button on your LCD keypad is assigned a set of characters. To obtain the desired character

using the numeric buttons on your keypad, press the corresponding button until the desired character

appears on the screen. For example, if you want to enter the character “C”, press the [1] button three

times (refer to Table 1 on page 10). If using a Hebrew keypad, refer to Table 4 in Appendix 1: Hebrew

Special Characters on page 25. If using a Russian keypad, refer to Table 6 in Appendix 2: Russian

Special Characters on page 26.

Table 1:

Keypad Letter Assignment

5.2.2 S

PECIAL FUNCTION KEYS

[STAY] = Insert Space

Pressing the [

STAY] key inserts a blank space in the current cursor position.

[

FORCE] = Delete

Pressing the [

FORCE] key will delete the character or blank space found at the current cursor position.

[

ARM] = Delete Until the End

Pressing the [

ARM] key will delete all characters and spaces to the right of the cursor and at the cursor's

position.

[

DISARM] = Numeric Keys / Alphanumeric Keys

Every time the [DISARM] key is pressed it will toggle from numeric keys to alphanumeric keys and vice

versa. Numeric: Keys [0] to [9] represent numbers 0 to 9.

[

BYP] = Lower Case / Upper Case

Every time the [

BYP] key is pressed it will toggle the case setting from lower to upper case and vice versa.

[

MEM] = Special Characters

After pressing the [

MEM] key, the cursor will turn into a flashing black square. Using Table 2 on page 11,

enter the 3-digit number that represents the desired symbol. If using a Hebrew keypad, refer to Table 5 in

Appendix 1: Hebrew Special Characters on page 25. If using a Russian keypad, refer to Table 7 in

Appendix 2: Russian Special Characters on page 26.

User labels personalize User

Access Codes and can be

assigned by pressing [

ENTER]

at any point after step 4

during the programming of

User Access Codes (Figure

5.1 on page 12). For

Example, the LCD keypad

can display “John Smith”.

How do I program a user label?

At any point after step 4 in Figure 5.1 on page 12:

1) Press the [

ENTER] button.

2) Type the desired characters as detailed in section 5.2.1 on page 10 and

section 5.2.2 on page 10.

3) Press the [S] button to move the cursor to a new space.

4) Repeat steps 2 and 3 until the desired label is complete.

5) Press the [ENTER] button to save and exit.

Key

Press Key

Once

Press Key

Twice

Press Key

Three Times

[1] ABC

[2] DEF

[3] GH I

[4] JKL

[5] MNO

[6] PQR

[7] STU

[8] VWX

[9] YZ

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Komentáře k této Příručce

Žádné komentáře

Digiplex DGP2-641BL Provozní pokyny Strana 10

Komentáře k této Příručce