Digiplex DGP-641 Instalační manuál Strana 28
- Strana / 68
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
24 Reference & Installation Manual
8 Event Reporting
Figure 20: Event Reporting
Related Features
Delay Before Alarm Transmission
Section [256]
Pager Format Delay Transmission
Section [259]
Recent Closing Delay
Section [219]
Power Failure Report Delay
Section [260]
Auto Test Report
Sections [261] & [270]
Report Disarm Options - Options [7]
Section [506], [510], [514], [518]
Report Zone Restore Options - Option [8]
Section [522]
Alternate Dial
Option [6] - Section [522]
Dialing Enabled/Disabled
Option [3] - Section [521]
Partition 1
Partition 2
Partition 3
Partition 4
Reporting Account Number 1
3 or 4 digits (0-F) in Section [551]
Reporting Account Number 2
3 or 4 digits (0-F) in Section [552]
Reporting Account Number 3
3 or 4 digits (0-F) in Section [553]
Reporting Account Number 4
3 or 4 digits (0-F) in Section [554]
Monitoring Station Telephone
Numbers 1 through 4
32 digits Sections [561] to [564]
Dialing sequences for Arm/Disarm Report Codes
Partition 1 = Section [523] Partition 3 = Section [529]
Partition 2 = Section [526] Partition 4 = Section [532]
Dialing sequences for Alarm/Restore Report Codes
Partition 1 = Section [524] Partition 3 = Section [530]
Partition 2 = Section [527] Partition 4 = Section [533]
Dialing sequences for Tamper/Restore Report Codes
Partition 1 = Section [525] Partition 3 = Section [531]
Partition 2 = Section [528] Partition 4 = Section [534]
Dialing sequence for Trouble/Restore Report Codes
Section [535]
Dialing sequence for System Special Report Codes
Section [536]
Event Call Duration
Defines which monitoring
station telephone
numbers each specific
group of events will be
reported to.
Program 2-digit (00-FF) report
codes into Sections [600] to
[718] where each section
represents up to 4 events in the
system.
[0]
Ademco Slow
[1]
Silent Knight Fast
[2]
Sescoa
[3]
Ademco Express
[7]
Pager
[5]
Ademco Contact I.D.
[6]
SIA FSK
Pulse
DTMF
(Tone)
Reporting Formats
Section [550]
1
st
digit = MSTN#1
2
nd
digit = MSTN#2
3
rd
digit = MSTN#3
4
th
digit = MSTN#4
Sections [790] to [795]
Manual & Automatic programming of report codes, refer to:
1) Ademco Contact ID and SIA FSK under Reporting Formats
2) Auto Report Code Programming
Delay Between
Dialing Attempts
Section [258]
Maximum Dialing
Attempts
Section [257]
[1] = Call Monitoring Telephone 1
[2] = Call Monitoring Telephone 2
[3] = Call Monitoring Telephone 3
[4] = Call Monitoring Telephone 4
[5] = Backup on Telephone 1
[6] = Backup on Telephone 2
[7] = Backup on Telephone 3
[8] = Backup on Telephone 4
For each section (dialing sequence) you
can enable up to 4 monitoring station
telephone numbers and 1 of 4 back-up
telephone numbers. The numbers are
dialed sequentially from 1 to 4 followed
by the back-up number. This sequence
will continue until each number has been
dialed at least once.
Reporting Account
Numbers
MSTN = Monitoring
Station Telephone
Number
- Table of Contents 3
- Introduction 5
- Installation 6
- DGP-848 Control Panel 3 7
- BELL output has 8
- AUX. OUTPUT = 700mA 9
- 2.9 Programmable Outputs 10
- 2.10 Combus Connections 10
- 2.11 Single Zone Connections 10
- 2.12 Double Zone Connections 11
- 2.13 Keypad Zone Connections 11
- 2.14 Keyswitch Connections 11
- 2.15 Fire Circuits 11
- ENTER] (LCD keypads) or [ 12
- Programming Methods 13
- 3.6 Level Programming 14
- 3.7 Paradox Memory Key 14
- Zone Programming 15
- 4.1 Zone Numbering 16
- 4.2 Zone Definitions 16
- 4.3 Zone Partition Assignment 17
- 4.4 Zone Options 17
- 4.5 Zone Labels 18
- DGP-848 Control Panel 15 19
- 4.6 Input Speed 20
- 4.7 EOL Zones 20
- 4.8 Zone Doubling (ATZ) 20
- Keyswitch Programming 21
- 5.2 Keyswitch Definitions 22
- 5.4 Keyswitch Options 22
- 6.1 Arming Follows Partition 23
- 6.3 No Arming On Tamper 23
- 6.5 Timed Auto-Arming 23
- 6.6 No Movement Auto-Arming 24
- 6.7 Auto-Arming Options 24
- 6.8 One-Touch Features 24
- 6.9 Exit Delay 24
- 6.10 Keypad Lock-out Feature 24
- ECTIONS [238] TO [241] 25
- ECTION [504]: OPTION [5] 25
- Alarm Options 26
- 7.5 Keypad Panic Options 27
- Event Reporting 28
- 8.1 Reporting Enabled 29
- 8.2 Report Codes 29
- 8.4 Partition Account # 31
- 8.5 Reporting Formats 31
- 8.6 Event Call Direction 31
- Dialer Options 33
- Programmable Outputs 34
- 10.2 PGM Deactivation Event 35
- 10.3 PGM Deactivation Option 35
- 10.4 PGM1 Is Smoke Input 35
- PGM Programming Table 36
- DGP-848 Control Panel 33 37
- (when system is 38
- (Tamper/Fire Loop) 38
- (Low Battery 38
- Supervision) 38
- 12.1 Hardware Reset 39
- 12.2 Software Reset 39
- 12.3 Battery Charge Current 39
- DGP-848 Control Panel 37 41
- Access Codes 42
- 13.5 User Options 43
- 13.7 Access Control 43
- 13.8 Multiple Action Feature 44
- Access Control 45
- 14.6 Access Levels 46
- 14.7 Schedules 46
- 14.8 Holiday Programming 46
- DGP-848 Control Panel 43 47
- WinLoad Software 48
- User Features 49
- 16.2 Bypass Programming 50
- 16.3 Chime Zones 50
- 16.4 Access Codes 50
- 16.6 Keypad Settings 51
- 16.7 Trouble Display 51
- 16.8 Trouble Latch 52
- 16.9 Clear Bell Limit Trouble 52
- 16.10 Event Record Display 53
- 1.0 INSTALLATION 54
- 2.0 PROGRAMMING 55
- 3.0 SYSTEM OPTIONS 55
- 641BL ONLY) 57
- 6.0 MESSAGE PROGRAMMING 59
- Table 14: Message Programming 59
- 7.0 PROGRAMMING SECTIONS 60
- DGP-848 Control Panel 57 61
- DGP-848 Control Panel 59 63
- Warnings 64
- FCC Warnings 64
- CTR-21 Warnings 64
- General Warning 64
- UL and C-UL Warnings 64
- Warranty 65
Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digiplex DGP-641
(60 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce