Digiplex DGP-641 Specifikace stáhnout pdf (Strana 9)

8 Installer’s Guide

3.2 PROGRAMMING METHODS

3.2.1 Feature Select Programming

Program sections [001] to [005] by enabling or disabling options.

Within the sections, numbers from [1] to [8] represent a specific

keypad option. Press the key corresponding to the desired option

and the digit will appear in the display. This means the option is

enabled. For example, in Step 6 of Figure 3-1, options [1] and [4] are

enabled. Press the key again to remove the digit from the display

thereby disabling the option. Press [ENTER] when options are set.

3.2.2 Decimal Programming

Sections [006] and [007] are programmed using "Decimal

Programming". In this method, any digit from 000 to 255 can be

entered.

3.3 MODULE BROADCAST

The Digiplex Control Panel’s Module Broadcast feature can be used

to copy the contents of one keypad to one or many other keypads.

Step 1: From Normal Mode press and hold the [0] key.

Step 2: Enter [INSTALLER CODE].

Step 3: Enter section [954].

Step 4: Enter the [SERIAL #] of the source keypad.The source is the

programmed keypad whose data you want to copy to other keypads.

Step 5: Enter the [SERIAL #] of the destination keypads. The

destination is the keypad(s) you want to program with the source’s

data. If you want to program more than one keypad with the source’s

data, enter the serial numbers of the keypads one at a time.

Step 6: Once you have entered the serial numbers of the keypads

you want to program, press the [ACC] key.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Žádné komentáře

Digiplex DGP-641 Specifikace Strana 9